Yellow Welding Transformer 160KVA Motor 5.5kw Wire Mesh Welding Machine
Wire Mesh Welding Machine Introduction:
Wire Mesh Welding Machine consists mainly of main machine for welding, Longitudinal wire feeding mechanism, cross wire falling mechanism, pulling mesh system, electric control system, water cooling system, etc.
Wire Mesh Welding Machine Features:
1. Welding wire diameter range is 3-6mm, Longitudinal wire space is 50-200mm, The cross wire space is 50-300mm. stepless adjustable.
The maximum width of the welding wire mesh is 2500mm (also according to customer requirements).
2. Both line wires and cross wires are pre-straighten and pre-cut, can weld continuous wire mesh sheets. The longitudinal wire is feeding by car.Save labor cost and increase production capacity.
3. Install: The wire mesh welding machine no need install the anchor bolt, only need to put on the ground of your workshop.
4. Adjust: The cross wire space and longitudinal wire space will be adjusted as your requirement. All of the debugging working will be done in the factory manufacture by our engineers. We will send manual operation of the wire mesh welding machine to you.
5. Control systerm: PLC Control Systerm. Very easy to operate.
6. Welding transformer: The capacity is160KVA. If mesh width 2500mm. mesh size 50x50mm. Need 6 pcs welding transformers.
7. Welding transformer: Water cooling.
8. Machine accessories: 2 sets wire straightening and cutting machine.
9. The length of mesh panel max up to 7m. The length of mesh is controlled by control cabinet. Input the length of mesh by touch screen.
10. The wire mesh welding machine is suitable for galvanized steel wire, low carbon wire. stainless steel wire.
Wire Mesh Welding Machine Technical Parameters:
| Model | DX-GWCD-2000D | DX-GWCD-2500D |
| Welding speed | 45-65 times per min | 45-65 times per min |
| Machine weight | 4.5T | 5.5T |
| Machine dimension | 6000*2700*1800mm | 6000*3200*1800mm |
| Control system | PLC Mitsubishi | PLC Mitsubishi |
| Servo motor | Panasonic Japan | Panasonic Japan |
| Control switch | Schneider France | Schneider France |
| Number of welding electrodes | 40PCS | 48PCS |
| Welding transformer | Water cooling system | Water cooling system |
| Line wire type | Pre-straighten and pre-cut | Pre-straighten and pre-cut |
| Cross wire type | Pre-straighten and pre-cut | Pre-straighten and pre-cut |
| Line wire space | 50-200mm | 50-200mm |
| Cross wire space | 50-300mm | 50-300mm |
| Labor cost | Two persons | Two persons |
Wire Mesh Welding Machine Applications:
The wire mesh welding mahcine is used in coal mine roof protection, tunnel, bridge construction, subgrade net bars, construction site construction materials.
Wire Mesh Welding Machine Photos:
Product Tags:
|
|
Yellow Welding Transformer 160KVA Motor 5.5kw Fence Mesh Welding Machine Images
|
